Silicon Windows

Silicon Window

picture

 

Attribute Specification
Typical Diameter (Φmm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0
Typical Thickness (mm) 1.0 ~ 20.0
Diameter Tolerance (mm) +0.0/-0.2 (General), +0.0/-0.1 (High Precision)
Thickness Tolerance (mm) ±0.2 (General), ±0.05 (High Precision)
Clear Aperture >80% (Small Size), >90% (Large Size)
Parallelism 3 min. (General), 10 sec. (High Precision)
Surface Quality 60/40 (General), 10/5 (High Precision)
Roughness Ra (nm) <1 nm (roughness test report)
Flatness (per 25mm@633nm) λ(General), λ/4 (High Precision)
Bevel (face width x 45。) <0.25mm
Coating Uncoated, AR, HR, PR, Coating, etc.

 

Side surface (cylinderical surface and bevel surface) with commercial polishing (Rz<1 micron) is available upon request.

Note for Silicon Window: 
1). Custom-made Silicon windows at any size are available.
Besides round, shape of quadrate, triangular, or other polygonal are available. 
2). Thickness from 1.0mm to 80.0 mm is available upon request.
3). Better bevel is available upon request.
4). Si Windows with Anti-Reflective(AR), High-Reflective(HR), Partial-Reflective(PR) coating are available.

-

© 2012-2022 Antyco Optics Co., Ltd.

TEL:+86-591-83853506 FAX:+86-591-83853765

Add: 4/F, 12th Bldg, Taijiang Industrial Park, Juyuanzhou Industrial Zone, Fuzhou, Fujian, China