Penta Prism

Penta Prisms

Penta prism can deviate an incident beam without inverting or reversing to 90°.The deviation angle of 90° is independent of any rotation of the prism about an axis parallel to the line of intersection of the two reflecting faces. It is commonly used in Plumb Level, Surveying, Alignment, Range finding and Optical Tooling. The reflecting surfaces of this Prism must be coated with a metallic or dielectric coating. The standard Penta Prism reflecting surfaces are coated with aluminum or enhanced aluminum.

Standard Precision Penta Prism

 

Attribute Specification
Material N-BK7 Grade A optical glass
Dimension Axh (mm) 2.5x2.5 ~ 100.0x100.0
Dimension Tolerance (mm) ±0.2 (General), ±0.05 (High Precision)
900 Deviation Tolerance <1 min. (General), <3 sec. (High Precision)
Flatness @633nm λ/2 (General), λ/4 (High Precision)
Reflection (per face@400700nm)  R>90%
Surface Quality 60/40 (General), 20/10 (High Precision)

 

 

Size(mm) 1 Min. Deviation 30 Sec.Deviation 10 Sec.Deviation
A x h Part No. Part No. Part No.
2.5 x 2.5 PP1101 PP1201 PP1301
7x5 PP1102 PP1202 PP1303
7 x 6 PP1103 PP1203 PP1304
10 x 10 PP1104 PP1204 PP1305
15 x 15 PP1105 PP1205 PP1306
20 x 20 PP1106 PP1206 PP1307

 

High Precision Penta Prism

By adding a wedge for deviation correction in output beam surface, it can be used as Percision Penta Prism. It is often used in Plumb Level, Surveying, Alignment, Rangefinding and Optical Tooling.

Material: ------------------------------------------------------- N-BK7 Grade A optical glass 
Dimension Tolerance: -------------------------------------------------------------- ±0.2mm
90° Deviation Tolerance: ---------------------------------------------------------------- <5''
Flatness: -------------------------------------------------------------------------l /4@633nm
Reflectivity: ---------------------------------------------- R>90% per face @400-700nm
Surface Quality: --------------------------------------------------- 60-40 scratch and dig
Coating on input and output sides: ------------------------------------------- Uncoated

 

Size(mm)
1 Min. Deviation
10 Sec.Deviation
A x h
Part No.
Part No.
7x5
PP1402
PP1502
7x6
PP1403
PP1503
10 x 10
PP1404
PP1504
15 x 15
PP1405
PP1505
20 x 20
PP1406
PP1506

 Note:

(1). Besides N-BK7 glass, other optical glass is available for custom-made Penta Prisms.
(2). Penta Prism at bigger size is available.
(3). Typical deviation tolerance is 1 minute, better precision such as 30 sec, 10 sec, 5 sec or 3 sec is available.
(4). Typical reflection is >90% by Al coating, other metal coating such as Ag, Cu, or High Reflection Dielectric Coating is available.
(5). Besides uncoating, Anti-Reflective(AR) coating is available upon request. 

-

© 2012-2022 Antyco Optics Co., Ltd.

TEL:+86-591-83853506 FAX:+86-591-83853765

Add: 4/F, 12th Bldg, Taijiang Industrial Park, Juyuanzhou Industrial Zone, Fuzhou, Fujian, China